E133 is one of the most common codes on Baxi boilers, including the Baxi 600, 800 and Duo-tec. It means the boiler has not detected a flame, either because the gas supply has been interrupted or because ignition has failed.
Never remove the boiler casing or touch any gas parts yourself. Work inside a gas appliance is illegal unless you are Gas Safe registered, and it can be dangerous.
What causes E133?
The boiler needs gas, a spark and a clear path for flue gases and condensate before it will light. E133 appears when one of those is missing. Common causes include:
- An interrupted gas supply, or a prepayment meter with no credit
- Gas supply work nearby or a new meter leaving air in the pipe
- A frozen or blocked condensate pipe in winter
- A worn ignition electrode or flame sensor
- A faulty gas valve or PCB inside the boiler
Some of these you can check yourself. Faults inside the boiler need a Gas Safe registered engineer.
Safe checks you can make
Check your gas supply
Try your gas hob or another gas appliance. If nothing works, check that the valve at the gas meter is on and, if you have a prepayment meter, that there is credit. If neighbours have lost gas too, call the National Gas Emergency line on 0800 111 999.
Check the condensate pipe
In freezing weather, look at the plastic pipe running from the boiler to an outside drain. If it is frozen and you can reach it safely at ground level, pour warm, not boiling, water along it to thaw it. Do not climb ladders.
Reset the boiler once
Once you have checked the gas and the condensate pipe, reset the boiler as described in your manual. If it lights and stays lit, keep an eye on it. If E133 comes back, do not keep resetting it; call an engineer.
When to call a Gas Safe engineer
Call us if E133 returns after one reset, if your gas supply is fine and the condensate pipe is clear, or if the code appears regularly. Repeated E133 faults usually point to an ignition or gas valve problem that must be tested inside the boiler.
Our engineers repair Baxi boilers across Newcastle upon Tyne, North Tyneside, Gateshead and surrounding areas. Find out more on our Baxi boiler repair page, or see our boiler repairs page. A repair visit is £85, covering the call out, diagnosis and first hour of labour.
If you smell gas, do not reset the boiler. Open windows and doors, do not use electrical switches, turn the gas off at the meter if it is safe to do so and call the National Gas Emergency line on 0800 111 999.
More help with fault codes
Our guide to boiler fault codes explained covers the other common code families, including low pressure and overheat faults.
Written by the engineers at Newcastle Boiler Maintenance Ltd, Gas Safe registered heating engineers in Newcastle upon Tyne.

