Skip to content
Newcastle Boiler Maintenance Ltd logo
Boiler parts and engineer's tools laid out ready for a boiler repair

Boiler problems

Vaillant F28 fault code: what it means

Your Vaillant is showing F28 and will not fire up. Here is what the code means, what you can safely check and when to call us.

4 min read

F28 is a common code on Vaillant boilers, including the ecoTEC plus and ecoTEC pro. It means the boiler failed to ignite when it tried to start up. It is different from F29, which means the flame went out while the boiler was already running.

Never remove the boiler casing or touch any gas parts yourself. Work inside a gas appliance is illegal unless you are Gas Safe registered, and it can be dangerous.

What causes F28?

The boiler needs gas, a spark and a clear path for flue gases and condensate before it will light. F28 appears when one of those is missing. Common causes include:

  • An interrupted gas supply, or a prepayment meter with no credit
  • Air in the gas pipe after a new meter has been fitted
  • A frozen or blocked condensate pipe in cold weather
  • A worn ignition electrode or damaged ignition lead
  • A faulty gas valve or PCB inside the boiler

Some of these you can check yourself. Faults inside the boiler need a Gas Safe registered engineer.

Safe checks you can make

Check your gas supply

Try your gas hob or another gas appliance. If nothing works, check that the valve at the gas meter is on and, if you have a prepayment meter, that there is credit. If neighbours have lost gas too, call the National Gas Emergency line on 0800 111 999.

Check the condensate pipe

In freezing weather, look at the plastic pipe running from the boiler to an outside drain. If it is frozen and you can reach it safely at ground level, pour warm, not boiling, water along it to thaw it. Do not climb ladders.

Reset the boiler once

Once you have checked the gas and the condensate pipe, press the reset button on the boiler as described in your manual. If it lights and runs normally, keep an eye on it. If F28 comes back, do not keep resetting it; call an engineer.

When to call a Gas Safe engineer

Call us if F28 returns after one reset, if your gas supply is fine and the condensate pipe is clear, or if the boiler shows F28 or F29 regularly. These usually point to an ignition, gas valve or electronics fault that must be tested inside the boiler.

Our engineers repair Vaillant boilers across Newcastle upon Tyne, North Tyneside, Gateshead and surrounding areas. Find out more on our Vaillant boiler repair page, or see our boiler repairs page. A repair visit is £85, covering the call out, diagnosis and first hour of labour.

If you smell gas, do not reset the boiler. Open windows and doors, do not use electrical switches, turn the gas off at the meter if it is safe to do so and call the National Gas Emergency line on 0800 111 999.

More help with fault codes

Our guide to boiler fault codes explained covers the other common code families, including low pressure and overheat faults.

Written by the engineers at Newcastle Boiler Maintenance Ltd, Gas Safe registered heating engineers in Newcastle upon Tyne.

Speak to a real engineer

Speak to a local Newcastle engineer

Call us for straightforward advice, or book a visit and we will get back to you.

5.0 from 430+ Google reviews

Gas Safe registered engineers

5.0