EA227 is one of the most common codes on Worcester Bosch boilers, including Greenstar combis. It means the boiler has tried to light but the flame sensor has not detected a flame. As a safety measure, the boiler stops and locks out until it is reset.
Never remove the boiler casing or touch any gas parts yourself. Work inside a gas appliance is illegal unless you are Gas Safe registered, and it can be dangerous.
What causes EA227?
The boiler needs gas, a spark and a clear path for flue gases and condensate before it will light. EA227 appears when one of those is missing. Common causes include:
- An interrupted gas supply, or a prepayment meter with no credit
- A frozen or blocked condensate pipe, very common in a Newcastle winter
- A worn or dirty ignition electrode or flame sensor
- Low gas pressure reaching the boiler
- A faulty gas valve, fan or PCB inside the boiler
Some of these you can check yourself. Faults inside the boiler need a Gas Safe registered engineer.
Safe checks you can make
Check your gas supply
Try your gas hob or another gas appliance. If nothing works, check that the valve at the gas meter is on and, if you have a prepayment meter, that there is credit. If neighbours have lost gas too, call the National Gas Emergency line on 0800 111 999.
Check the condensate pipe
In freezing weather, look at the plastic pipe running from the boiler to an outside drain. If it is frozen and you can reach it safely at ground level, pour warm, not boiling, water along it to thaw it. Do not climb ladders.
Reset the boiler once
Once you have checked the gas and the condensate pipe, press and hold the reset button as described in your manual. If the boiler lights and stays lit, keep an eye on it. If EA227 comes straight back, stop resetting and call an engineer.
When to call a Gas Safe engineer
Call us if EA227 returns after one reset, if your gas supply is fine and the condensate pipe is clear, or if the code keeps appearing every few days. Repeated ignition failures usually point to a worn electrode, a failing gas valve or a PCB fault, and each needs testing inside the boiler.
Our engineers repair Worcester Bosch boilers across Newcastle upon Tyne, North Tyneside, Gateshead and surrounding areas. Find out more on our Worcester Bosch boiler repair page, or see our boiler repairs page. A repair visit is £85, covering the call out, diagnosis and first hour of labour.
If you smell gas, do not reset the boiler. Open windows and doors, do not use electrical switches, turn the gas off at the meter if it is safe to do so and call the National Gas Emergency line on 0800 111 999.
More help with fault codes
Our guide to boiler fault codes explained covers the other common code families, including low pressure and overheat faults.
Written by the engineers at Newcastle Boiler Maintenance Ltd, Gas Safe registered heating engineers in Newcastle upon Tyne.

